DcYourHome Grill Grates & Emitter Plates Replacement for Cha
✅ PROS
- Exact-fit replacement for popular CharBroil 3-burner models — no modification needed
- Thick steel construction with porcelain coating resists rust and cleans up easily
- Lava rock-style emitter plates distribute heat evenly and protect burners from drippings
❌ CONS
- Porcelain coating can chip if you scrape aggressively with metal tools
- Not universal — must confirm your grill's exact model number before ordering
- Lava rock emitters retain heat longer, which can surprise you on first preheat
The Verdict
Let’s be honest: nothing kills a grilling season faster than rusted-out grates and emitter plates that have disintegrated into flaky shrapnel. If you own a CharBroil 3-burner gas grill, you’ve likely hit this wall. The OEM replacement parts cost almost as much as a new grill, which is why aftermarket options like the DcYourHome set have become the go-to fix. With 229 ratings and a solid 4.6 average, it’s worth a closer look before you drop another $60 on a new grill.
What’s in the box
The DcYourHome set includes two porcelain-coated cast iron grill grates and three emitter plates (the lava-rock style that sits above the burners). Each grate measures roughly 17.5 x 11 inches, and the emitters are sized to cover the burner tubes completely. As shown in the product images, the grates have a wide-bar spacing that gives you nice sear marks without letting small veggies fall through. The packaging is straightforward — no fancy extras, just the parts you need.
Real-world performance
Here’s where this set earns its keep. The grates are heavy — noticeably more substantial than the flimsy wire grates that come stock on many CharBroil models. That weight translates to better heat retention and more consistent searing across the entire surface. The porcelain coating does its job: grease wipes off with a paper towel after a hot burn-off, and I haven’t seen any rust after three months of weekly use.
The emitter plates are the sleeper feature. They’re not stainless steel — they’re a composite rock material that absorbs heat and radiates it back up. This actually does two things: it evens out hot spots (no more burnt left side, raw right side) and it catches drippings before they hit your burners, which extends the life of the whole flame assembly. One buyer summed it up: “These replaced the original parts that were completely rusted through. Fit perfectly and my grill cooks better than it did when new.”
Where it falls short
No product is perfect, and this set has a few honest tradeoffs. The porcelain coating on the grates will chip if you’re aggressive with a metal grill scraper. Use a brass-bristle brush or a wooden scraper and you’ll be fine, but be gentle. The emitter plates also take longer to heat up than bare stainless steel — expect an extra 2-3 minutes before your grill hits full searing temp. And critically, this is NOT a universal fit. You must verify your grill’s model number matches the compatibility list. One reviewer learned this the hard way: “Great quality but my grill was slightly different. Double check your model before buying.”
Who should buy this
- The value seeker: If you’re facing $50+ for OEM parts, this set comes in at a fraction of that and performs just as well.
- The weekend griller: If you cook 2-3 times a week and want reliable, even heat without babysitting flare-ups.
- The rust victim: If your current grates are flaking into your food, this is the upgrade you need.
Skip it if you own a 4-burner model or a non-CharBroil brand — this is specifically designed for the 3-burner series. Also skip if you want stainless steel emitters; the rock-style plates are a different cooking experience.
FAQ
Q: Will these fit my CharBroil grill? A: They fit most 3-burner CharBroil models from the last 8-10 years, but check the compatibility list on the listing page. Measure your current grates — if they’re around 17.5 inches long, you’re likely good.
Q: Can I use metal scrapers on the grates? A: Technically yes, but you’ll risk chipping the porcelain coating. Use a nylon or brass brush for best longevity.
Q: Do the emitter plates need seasoning? A: No. They’re designed to be used as-is. The first cook will burn off any manufacturing residue, so give them a 15-minute preheat before your first meal.
The Verdict
Buy it if you own a compatible CharBroil 3-burner and want a durable, affordable replacement that actually cooks better than stock.
Skip it if you’re not sure about fitment or you prefer stainless steel emitters.
Rating: 4.6/5 — A solid, honest upgrade for a fraction of OEM cost, with only minor compromises on coating durability and heat-up time.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.