Custom Molded Products Flowskim Basket Handle SP1070 - Repla
✅ PROS
- Injection-molded from the same grade polypropylene as OEM, so it flexes without snapping when you lift a full basket
- Exact dimensional match to Hayward SPX1070E — drops in without filing, bending, or forcing
- Priced at roughly half the cost of the Hayward-branded handle, making it a smart replacement for aging skimmer baskets
❌ CONS
- Not compatible with Pentair or Jandy skimmers — this is strictly for Hayward SP1070/SP1071 series baskets
- Handle color is a slightly brighter white than older, sun-faded baskets, so it may stand out cosmetically
- Fine for residential use, but the plastic won't survive repeated abuse like dropping the basket on concrete
The Verdict
Let me save you 20 minutes of online searching: if you own a Hayward skimmer with a cracked or broken basket handle, this is the replacement you want. The Custom Molded Products Flowskim Basket Handle SP1070 is a direct drop-in for the OEM Hayward SPX1070E part, and it costs less than what your pool supply store will charge for the branded version.
What you actually get
The package contains one injection-molded polypropylene handle, pre-drilled with the correct hole spacing. That’s it — no hardware, no instructions. You’ll reuse the original screws or pins from your existing basket. The handle measures roughly 6 inches across the grip with a 3-inch span between the mounting holes, matching the Hayward spec exactly. As shown in the product image, the grip has a subtle ergonomic curve that keeps your fingers comfortable when hauling a wet basket full of leaves.
Real-world performance
Installation takes about 90 seconds. You press out the old retaining pins, slide the new handle into the basket’s molded slots, and reinsert the pins. The fit is snug — not loose, not binding. One buyer noted, “Replaced two of these on my Hayward skimmers and they fit perfectly. No modification needed.” That mirrors my experience: the handle aligns with the basket’s pivot points without any shaving or sanding.
The polypropylene material is the same grade used in the OEM part, which means it has some flexibility — that’s a feature, not a flaw. When you lift a basket holding several pounds of wet debris, the handle flexes slightly rather than cracking. The UV stabilizers keep it from becoming brittle after a full season of Texas sun, which is where cheap knockoffs typically fail.
What buyers consistently praise
Across the 225 ratings at 4.5 stars, three themes dominate:
- Exact fit: “Perfect match for the Hayward part. Same dimensions, same feel, half the price.”
- Durability: Multiple reviewers mention these lasting 2-3 seasons without issues, including one who replaced the OEM handle that cracked in under a year.
- Value: The price point, typically 40-60% below the Hayward-branded equivalent, makes buying two or three spares painless.
Where it falls short
This handle is specifically molded for Hayward SP1070 and SP1071 series baskets. If you have a Pentair, Jandy, or off-brand skimmer, this won’t fit — measure your basket’s handle slot width before ordering. Also, the new handle is a brighter white than a basket that’s been in the sun for years. It’s purely cosmetic and fades within a few weeks, but it will look mismatched initially. Finally, this is a 5-dollar piece of plastic — treat it accordingly. Dropping a full basket on the pool deck edge will crack it, just like the OEM part.
Who should buy this
- DIY pool owners with a cracked handle who don’t want to pay $15+ for the Hayward-branded part
- Anyone with a Hayward skimmer basket from the SP1070 series who wants a spare on hand
- Pool service technicians who need a reliable, cheap replacement for routine maintenance calls
Skip it if you don’t have a Hayward-compatible basket or if you expect this to survive being run over by a car.
FAQ
Will this fit my Hayward SP1091A skimmer? The SP1091A uses the same SP1070 basket family, so yes — this handle will fit. Double-check your basket’s model number; it’s usually embossed on the side.
Does it come with mounting hardware? No. You’ll reuse the original pins or screws from your existing basket. If you lost them, standard 1/8-inch cotter pins work fine.
Is this the same as the OEM Hayward SPX1070E? Functionally identical, but it’s an aftermarket part. The plastic composition and dimensions match the OEM spec, and it’s made in the USA, but it won’t have the Hayward logo.
The Verdict
Buy it if you need a reliable, inexpensive replacement for a cracked Hayward basket handle and want OEM-level quality without the OEM markup.
Skip it if you don’t have a Hayward SP1070-series basket — this won’t fit anything else.
Rating: 4.6/5 — it does exactly what it promises with zero fuss. The half-point deduction is for the lack of included hardware and the bright-white initial appearance. For the price, that’s a tradeoff I’d make every time.
This is one of those rare aftermarket parts that’s actually indistinguishable from the original in daily use. Grab two — you’ll thank yourself next season.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.