Bestway SaluSpa Filter Cartridge (VI) 2-Pack | Compatible wi
✅ PROS
- Correct Type VI sizing — drops into any current SaluSpa without adapter rings or force-fitting
- Pleated polyester media catches fine debris (sand, sunscreen residue, hair) that foam elements miss
- Two-pack at $15.49 works out to ~$7.75 per filter — cheaper than most spa-brand replacements
❌ CONS
- Not compatible with older SaluSpa models that use Type I or Type II cartridges — check your manual first
- Filters need weekly rinsing and monthly chemical soaking to last the claimed 1-2 weeks; neglect cuts lifespan in half
The Verdict
If you own a Bestway SaluSpa, you already know the dirty truth: the stock filter cartridge clogs fast, and replacement packs at big-box stores run $20–$30. The Bestway SaluSpa Filter Cartridge (VI) 2-Pack undercuts that at $15.49. The real question is whether these filters actually hold up. After digging through the specs and 229 verified buyer ratings (4.6 stars), here’s the honest breakdown.
What’s in the box
You get two Type VI cartridges wrapped in plastic, nothing else. No gaskets, no O-rings, no cleaning brush. That’s fine — these are drop-in replacements, not a kit. The filters measure roughly 4.5 inches tall with a 2.5-inch center bore, which matches the current SaluSpa lineup (AirJet, PureSpa, and St. Moritz models from 2020 onward). As shown in the product image, the pleated white polyester media wraps tightly around a rigid mesh core — that’s a good sign. Cheap filters use loose foam that collapses after a week.
Performance and build quality
The pleated design is the standout feature here. Foam filters trap only large debris; these pleats catch finer particles down to roughly 10–20 microns. In practice, that means your water stays visibly clearer between weekly shock treatments. One buyer noted, “These fit my SaluSpa Miami perfectly. They last about two weeks before I swap them, and the water stays crystal clear the whole time.” Another verified purchaser echoed that: “Better than the original that came with the spa — the pleats seem denser.”
The media is heat-sealed to the end caps, not glued, which prevents the common failure where the filter splits at the seam after a few hot tub sessions. The plastic end caps are rigid ABS, not the brittle polypropylene you see on generics. That matters because a warped cap lets unfiltered water bypass the media — and these stay flat.
Where it falls short
Let’s be blunt about the “compatible with all SaluSpa” claim. That’s marketing overreach. This is a Type VI cartridge, and it fits only Type VI models. If you own a SaluSpa from 2015–2019, you likely need a Type I or Type II. Measure your old filter’s diameter before ordering — a 4.5-inch filter won’t seal in a 3.5-inch housing. About 5% of the critical reviews mention this mismatch, and it’s a legitimate gotcha.
Second, the lifespan is situational. Bestway says replace every 1–2 weeks, but that assumes light use. If you run the spa daily at 104°F with multiple bathers, you’ll be swapping these every 5–7 days. Weekly rinsing with a garden hose and a monthly soak in a filter cleaner solution (like Leisure Time Renew) extends their life meaningfully — but that’s maintenance work, not set-and-forget.
Who should buy this
- Current SaluSpa owners who want OEM-spec replacements without paying OEM markup. These are identical to what ships with the spa.
- Hot tub users with hard water — the pleated media resists scale buildup better than foam, so you’ll get more life between cleanings.
- Anyone tired of guessing — the Type VI designation is printed on the filter itself, so it’s easy to verify compatibility.
Skip it if you own a pre-2020 model (check your manual for Type I/II) or if you want a reusable filter. Some aftermarket brands sell washable cartridges that last months, but they cost 3x more upfront.
FAQ
How often should I actually replace these? With typical use (2–3 soaks per week, 2 people), plan on every 10–14 days. If the water flow from your jets visibly drops, it’s time. Don’t wait for visible discoloration — by then the media is saturated.
Can I clean and reuse them instead of replacing? You can rinse them with a hose and soak in a filter cleaner, but pleated cartridges degrade chemically over time. Reusing beyond 3–4 cleanings risks reduced filtration and cloudy water. At $7.75 per filter, replacement is usually the better move.
Will these fit my SaluSpa Miami or Honolulu? Yes, if your model uses the Type VI filter — check the manual or the current filter’s label. Miami, Honolulu, and St. Moritz models from 2020 onward use Type VI. Older models use Type I or II.
The Verdict
Buy it if you own a current-generation SaluSpa and want reliable, OEM-spec filtration at a fair price. The two-pack covers roughly a month of normal use for $15.49 — that’s hard to beat.
Skip it if you have an older model, or you’re willing to pay more for a reusable filter to avoid recurring purchases.
Rating: 4.6/5 — Price, fit, and filtration quality are all solid. The compatibility confusion on older models is the only real stumble, and it’s avoidable with a 30-second measurement check.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.