DV42H5000EW/A3 DV45H7000EW/A2 DV40J3000EW/A2 Dryer Heating E
✅ PROS
- Direct replacement for three common Samsung dryer models — no modifications needed
- Includes the heating element coil, thermal fuse, and thermostat in one kit
- Noticeably cheaper than OEM Samsung parts (often 40-50% less)
❌ CONS
- Inconsistent quality control — several buyers report premature failure within months
- Some units arrive with bent mounting brackets or loose connections
- No installation guide included; you'll need to find a YouTube tutorial
The Verdict
If your Samsung dryer stopped producing heat but the drum still tumbles, you’ve likely got a dead heating element. This aftermarket kit claims to fix that problem for a fraction of OEM cost. But with a 3.6-star average across 180 ratings, the question isn’t whether it fits — it’s whether it lasts.
What’s Actually in the Box
The kit arrives with three critical components: the heating element coil assembly, a thermal fuse, and a high-limit thermostat. For the DV42H5000EW/A3, DV45H7000EW/A2, and DV40J3000EW/A2 models, this covers the full heating circuit — which is smart, because replacing just the coil when the fuse is blown is a recipe for a second teardown.
The element itself is a standard nichrome wire wound around a ceramic frame. It looks identical to the OEM part, and the mounting holes align properly with the heater box on all three compatible models. As shown in the product image, the terminal connections are clearly labeled, which helps when you’re working in a cramped dryer cavity.
Real-World Performance
When it works, it works. The element heats up to the correct temperature range — typically 140-160°F on high heat — and the thermal cutoff protects against overheating. Multiple buyers report successful DIY fixes that restored their dryers to full function. One reviewer noted: “Saved $200 by fixing it myself. Worked perfectly for six months, then the dryer started taking two cycles again.”
That last sentence is the pattern you need to pay attention to. The most consistent complaint in the review data is durability. Several verified purchasers reported the replacement element burning out within 2-6 months — some as quickly as three weeks. One frustrated buyer wrote: “Installed exactly like the OEM part. Dead in a month. This is a cheap knockoff, not a replacement.”
The thermal fuse included in the kit is also a point of concern. A handful of reviewers found the fuse was blown on arrival or failed prematurely, which will trip the dryer into no-heat mode even with a perfectly good element.
Where It Falls Short
Quality control is the biggest gamble here. The manufacturing tolerances are inconsistent — some units fit flush, others have mounting brackets that need bending, and the wire gauge feels slightly thinner than the genuine Samsung part. There’s also no paper manual in the box; you’re on your own for the disassembly sequence, which means watching a third-party video and hoping your model matches.
For a part that lives inside a 240V appliance, the lack of a warranty is a real risk. If this fails in three months, you’re buying another one.
Who Should Buy This
The budget-conscious DIYer — if you’re comfortable with a multimeter and basic appliance repair, this kit can save you $150-200 in labor and markup. The temp-fix homeowner — if you just need your dryer working for another year before replacing it, this might be all you need.
Skip it if you want a permanent repair. For that, pay the premium for an OEM Samsung heating element. Skip it if you’re not handy with electrical components — a miswired 240V connection is dangerous, not just inconvenient.
FAQ
Q: Does this fit my DV45H7000EW/A2? A: Yes, the kit is explicitly designed for the DV42H5000EW/A3, DV45H7000EW/A2, and DV40J3000EW/A2. Cross-reference your model number on the dryer’s door frame before ordering — Samsung uses similar model numbers for gas and electric versions.
Q: Do I need to replace the thermal fuse at the same time? A: You should. When an element fails, it often takes the fuse with it. The kit includes both, so replace them together — it costs nothing extra and prevents a repeat failure.
Q: How hard is the installation? A: Moderate difficulty. Expect 45-90 minutes. You’ll need to remove the front panel, disconnect the vent hose, and access the heater box at the bottom rear. If you’re not comfortable with a screwdriver and basic wiring, hire a professional.
The Verdict
Buy it if you’re handy, patient, and willing to gamble on QC for a low-cost fix. Skip it if you need a guaranteed, long-term repair — the OEM part is worth the extra money.
Rating: 3.7/5 — A functional but inconsistent aftermarket part. It does the job when it works, but the durability roulette is a real concern. For a part that’s buried inside a major appliance, reliability matters more than the $30 you save.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.