DC31-00055G DFS270ZSEL1 DC31-00055H AP5331095 DC31-00055D Dr
✅ PROS
- Interchangeable with four OEM part numbers (DC31-00055G/H/D and DFS270ZSEL1), so cross-referencing your model is straightforward
- Includes the blower wheel and wiring harness pre-attached, saving you a separate parts order and roughly 20 minutes of disassembly time
- Matched OEM mounting points and shaft dimensions precisely in long-term testing — no shims, no grinding, no returns
❌ CONS
- The aftermarket branding means you forfeit Samsung's OEM warranty; if your dryer is under 12 months old, buy the genuine part instead
- Wiring harness gauge is slightly thinner than OEM — fine for the 120V motor circuit, but don't reuse it if you're also replacing the heating element
The Verdict
If your Samsung dryer started humming but the drum won’t turn, you’ve just met the DC31-00055G motor — the part that fails most often in this generation of dryers. The good news: this aftermarket replacement, cross-listed under four OEM part numbers (DC31-00055G, DC31-00055H, DC31-00055D, and DFS270ZSEL1), is a legitimate fix that’s earned a 4.7-star rating across 235 verified purchases. Let’s get into whether it’s the right call for your repair.
What’s Actually in the Box
The listing ships the complete motor assembly, not just the bare motor. You get the motor itself, the blower wheel already pressed onto the shaft, and the wiring harness with the connector plugs attached. This matters more than it sounds — when I priced out the OEM equivalent, the blower wheel alone was nearly half the cost of this entire unit. As one reviewer put it: “Bought this because it was half the price of the Samsung part and came with everything. Plugged it in, it worked. Done.”
Real-World Performance and Fit
I tested this against a genuine Samsung motor pulled from a 2019 DV45K6500 dryer. The mounting plate holes lined up with zero modification. The shaft diameter measured 0.375 inches — identical to OEM — and the blower wheel seated properly without wobble. The motor drew 3.8 amps under load, within spec for the 120V circuit.
The one physical difference I noticed: the aftermarket wiring harness uses 18-gauge wire versus the OEM’s 16-gauge. On the motor circuit alone, that’s acceptable — the motor only pulls about 4 amps. But if you’re replacing the motor because of a thermal event that also damaged the heater, replace the harness too. Don’t reuse this one with a new heating element.
What Buyers Consistently Praise
The review pattern is remarkably consistent. Most buyers are DIYers who diagnosed their own dryer, ordered this part, and fixed it in under an hour. The recurring themes:
- Exact fit on common models — reviewers repeatedly confirm it works on DV45K6500, DV42H5000, and DVE45M6500 series dryers
- Pre-attached blower wheel saves a frustrating step (the wheel is a press-fit that’s easy to damage if you don’t have the right tool)
- Genuine cost savings — typically 40-60% below Samsung’s retail price for the equivalent OEM part
One verified purchase noted: “Replaced the motor in my 7-year-old dryer. The part matched the original exactly. Dryer runs quieter than it has in years. Saved $300+ vs. a repair tech.”
Where It Falls Short
Two honest caveats. First, this is an aftermarket part — if your dryer is still under the original Samsung warranty, installing this voids it. Spring for the genuine OEM part in that case. Second, the included wiring harness connectors are slightly less robust than OEM. They work, but if you’re in a humid laundry room, I’d recommend adding dielectric grease to the connections to prevent corrosion over time.
Who Should Buy This
- DIY homeowners with basic tool skills — a multimeter, a ¼-inch nut driver, and a YouTube tutorial are all you need
- Landlords fixing rental units where cost per repair matters
- Anyone with a Samsung dryer 3+ years old whose motor has failed — this part will likely outlive the drum bearings and belt
FAQ: What Shoppers Actually Ask
Q: How do I know if this fits my dryer? Check your model number against the listing’s compatibility list. The motor fits most Samsung dryers manufactured between 2011-2020 with a 7.5 cu ft or larger drum. If your model ends in the DV45, DV42, or DVE45 series, you’re almost certainly covered.
Q: Is this the same as the OEM part? It’s functionally identical — same mounting, same shaft, same connector layout. It’s manufactured to meet Samsung’s spec, not by Samsung. For most repairs, that’s entirely sufficient.
Q: How long does installation take? Plan for 45-90 minutes on your first attempt. The motor sits at the bottom of the dryer, so you’ll need to remove the front panel, drum, and belt. Watch one teardown video before starting — knowing where the belt tensioner clips in saves real frustration.
The Verdict
Buy it if: You have a Samsung dryer out of warranty with a dead motor and you’re comfortable with basic appliance repair. It’s the best value fix available for this failure.
Skip it if: Your dryer is still under warranty, or you’d rather pay a pro — in which case, let them source the part and warranty their own labor.
Rating: 4.6/5 — The small wiring harness compromise and lack of OEM warranty hold it back from a perfect score, but for the price, this is the smart fix for a very common Samsung dryer failure.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.