Beaquicy W10208631A Microwaves Grease Filter Approx. 13 inch x 6 inch
✅ PROS
- Exact OEM-equivalent dimensions (13 inch " x 6 inch ") with correct tab orientation for tool-free pop-in installation
- Multi-layer aluminum mesh catches grease effectively without restricting airflow — microwave venting stays strong
- Ships as a 2-pack, so you get a spare or can replace both filters on dual-filter over-the-range models
❌ CONS
- Not dishwasher-safe — hand washing with hot soapy water is required to avoid warping the aluminum frame
- Fits only the specific Whirlpool/KitchenAid/Maytag models listed — verify your model number before ordering
The Verdict
The $20 fix that saves you from a $300 service call
Over-the-range microwaves collect grease like a magnet. When that aluminum mesh filter gets clogged beyond cleaning, you’ve got two options: pay a technician $80–$150 to swap it, or buy the part yourself. The Beaquicy W10208631A grease filter makes that second option almost too easy — it’s a drop-in replacement that takes about 30 seconds to install.
What you actually get
The package contains two filters, each measuring approximately 13 inches by 6 inches. That’s the same footprint as the OEM Whirlpool W10208631A part, which means it’s compatible with a wide range of Whirlpool, KitchenAid, Maytag, and Amana over-the-range microwaves. The filter is constructed from layered aluminum mesh held in a rigid metal frame with the characteristic tab-and-slot design that locks into the underside of the microwave without any tools.
One thing worth noting from the product images: the frame has a slight curvature that matches the contour of most Whirlpool microwave bases. If your microwave is from a different brand, measure first — this isn’t a universal fit.
Real-world performance
The aluminum mesh does exactly what it’s supposed to: traps airborne grease before it reaches your microwave’s internal fan and ductwork. The layered construction creates enough surface area to catch cooking residue without choking airflow. One buyer noted, “My microwave vents noticeably better than with the old clogged filter — it actually pulls smoke away from the stove now.” That’s the difference between a fresh filter and one that’s been through two years of bacon Fridays.
Installation is genuinely tool-free. You slide the filter up into the slot, push the tab until it clicks, and you’re done. Removal is just as simple — press the release tab and it drops out. No screws, no clips, no swearing.
What buyers consistently praise
The 4.6-star average across 229 ratings tells a clear story. The most common themes in positive reviews:
- Exact fit — “Ordered this for my Whirlpool WMH53521HZ and it snapped right in. Perfect match to the original.”
- Value — the two-pack price undercuts a single OEM part from Whirlpool’s website, and you get a spare.
- Build quality — the aluminum frame is rigid, not flimsy like some third-party filters that bend during installation.
Where it falls short
Two honest caveats. First, do not put this in the dishwasher. The aluminum mesh will discolor and the frame can warp under the heat and water pressure. Hand-washing with hot, soapy water is the correct method — and even then, don’t scrub aggressively or you’ll deform the mesh.
Second, compatibility is narrower than some generic filters. It fits the W10208631A/AP6014496/PS11751285 part numbers specifically. If your microwave isn’t on the compatibility list, you’re gambling on dimensions. Check your model number before ordering — this isn’t a one-size-fits-all solution.
Who should buy this
- Anyone with a Whirlpool-family over-the-range microwave (Whirlpool, KitchenAid, Maytag, Amana) whose filter is clogged, stained, or falling apart
- Homeowners who prefer a 5-minute DIY fix over scheduling a service appointment
- People who cook with oil regularly — fried food, stir-fry, seared meats — and want a spare filter ready for the next swap
FAQ
How often should I replace my microwave grease filter? Every 6–12 months depending on cooking frequency. If you cook with oil daily, check monthly. When the mesh looks darkened and washing doesn’t restore it, replace it.
Is this filter washable and reusable? Yes. Hand-wash with hot water and dish soap, let it dry completely, and reinstall. It’s not dishwasher-safe — the aluminum frame will warp.
How do I verify this fits my microwave? Check the model number on the label inside your microwave door or on the back panel. Cross-reference it with the compatibility list on the product page. When in doubt, measure your current filter — it should be roughly 13" x 6".
The Verdict
Buy it if you own a Whirlpool-family over-the-range microwave and need a genuine replacement without the OEM markup. The two-pack value, exact-fit design, and tool-free installation make this a no-brainer for a routine maintenance task.
Skip it if your microwave is from Samsung, LG, GE, or another brand — you’ll need a different part number.
Rating: 4.6/5 — a solid, dependable replacement part that does exactly what it should. The only deductions are for the dishwasher hazard and the narrow compatibility range. For the right microwave, this is the perfect fix.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.