AMI PARTS DC97-16742A Dryer Lint Filter Case Screen Replacem
✅ PROS
- Precise OEM-equivalent fit for Samsung DC97-16742A models — snaps in without modification
- Fine mesh screen catches lint effectively without restricting airflow, cutting dry times
- Sturdy ABS plastic frame resists warping from heat, unlike some flimsy third-party filters
❌ CONS
- No gasket/seal included — if your old filter's rubber edge is worn, you'll need to transfer it
- Slightly thinner plastic than Samsung OEM — fine for most, but heavy-handed users should be careful
The Verdict
You don’t think about your dryer’s lint filter until the day your clothes come out damp after 60 minutes. That’s when you realize the mesh is torn, the frame is warped, or the handle snapped off. The AMI PARTS DC97-16742A is the replacement that most Samsung dryer owners land on—215 ratings averaging 4.3 stars say it’s doing something right. Here’s the honest breakdown before you click buy.
What You Actually Get
This is a single-piece unit: the lint filter case and the mesh screen assembled together. It’s designed to replace Samsung’s OEM part number DC97-16742A, which covers a wide range of front-load dryers—think the DV45K, DV42H, and DV48J series, among others. The frame is molded ABS plastic in Samsung’s standard gray, with a fine nylon mesh stretched across the opening. The handle is integrated into the frame, so you’re not juggling separate pieces.
One thing you won’t find in the box: a rubber gasket or seal. If your old filter had a soft edge that pressed against the dryer’s lint housing, you’ll need to peel it off and transfer it to this one. It’s a two-minute job, but worth knowing before you’re mid-install with a basket of wet laundry.
Real-World Performance
The mesh is the star here. It’s fine enough to catch the lint that normally escapes through a torn screen—which means less buildup in your dryer’s internal vent and exhaust duct. That’s not just a cleanliness issue; restricted airflow is what makes dryers run longer, overheat, and eventually trip thermal fuses. Buyers back this up. One reviewer noted, “My clothes are drying faster than they did with the cracked OEM filter I replaced.” Another said, “Fits perfectly, snaps in tight, no gaps around the edges.”
Fitment is where aftermarket parts usually fail, and AMI PARTS gets it right. The frame locks into the dryer’s slot with a positive click, and the handle sits flush. No trimming, no forcing, no “close enough.” That’s consistent across most of the 4- and 5-star feedback.
Where It Falls Short
Let’s be plain: this is not OEM. The plastic is noticeably thinner than Samsung’s original part. For the average user who pulls the filter out once a week, that’s a non-issue. But if you’re rough with it—yanking it out one-handed, dropping it on the floor—you might crack the frame. A handful of reviewers mention exactly that, so handle it with the same care you’d give the original.
The lack of an included gasket is the other quibble. On some Samsung models, the rubber seal is molded into the filter itself. On others, it’s a separate strip. If your dryer needs that seal and you don’t transfer it, you’ll get lint bypassing the filter and settling in the blower housing. Check your old part before you toss it.
Who Should Buy This
- Samsung dryer owners with a cracked or torn filter — this is the direct, affordable fix.
- DIYers who don’t want to pay $40+ for an OEM part — this typically runs about half the price.
- Renters or landlords maintaining multiple units — buy two; they’re cheap enough to keep on hand.
Skip it if you’re a stickler for 100% OEM-grade materials or if your dryer’s lint housing has a damaged gasket that needs replacing separately.
FAQ
Q: Will this fit my Samsung dryer? Check your model number against the DC97-16742A compatibility list. It covers most Samsung dryers from roughly 2011 onward, but verify before ordering. If your model uses DC97-14486A or DC97-16742B, this won’t match.
Q: How often should I replace my lint filter? Every 6–12 months, or as soon as you notice tears, warping, or a poor seal. A damaged filter makes your dryer work harder and is a fire hazard.
Q: Is this washable? Yes. Rinse it under warm water with a soft brush every few weeks to keep the mesh clear. Don’t put it in the dishwasher—the heat can warp the plastic frame.
The Verdict
Buy it if you need a reliable, drop-in replacement for a cracked or torn Samsung lint filter and don’t want to pay OEM prices. Skip it if you demand the exact plastic thickness of the factory part or if your dryer’s lint housing has its own gasket damage that needs fixing first.
For the price, the AMI PARTS DC97-16742A delivers exactly what 90% of shoppers need: a snug fit, effective lint capture, and restored airflow. It’s not built like a tank, but it doesn’t need to be. Just don’t throw it down the laundry chute.
Rating: 4.2/5 — solid value, minor material compromises, overwhelmingly positive real-world results.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.