4681EA2001T Washer Drain Pump Assembly Fit for Kenmore/LG Wa
✅ PROS
- Direct OEM-equivalent fit for LG/Kenmore models using the 4681EA2001T pump — no adapter or modification needed
- Quieter than the original pump for many buyers, with a sealed motor housing that reduces vibration noise
- Includes the full assembly (pump, motor, and drain hose connector) so you replace the whole failure point at once
❌ CONS
- No mounting bracket included — you must reuse the one from your old pump, which may be brittle after years of heat
- Some units arrive with the impeller slightly stiff; needs a few cycles to loosen up before full drainage speed
The Verdict
A washer that won’t drain turns a simple laundry day into a flood threat. If your LG or Kenmore is humming but not pumping, this 4681EA2001T drain pump assembly is likely the exact part you need. With 225 ratings averaging 4.5 stars, it’s one of the most-tested aftermarket replacements for this common failure point. Here’s what you actually need to know before you buy.
What’s in the box
You get the complete pump assembly — the motor, the pump housing, and the drain hose connector pre-attached. This is the full 4681EA2001T replacement unit, not just the motor or the impeller separately. The connector fits the standard 1-inch drain hose used on most LG and Kenmore front-loaders. As shown in the product image, the housing is molded black plastic with the motor sealed on top, matching the OEM part’s dimensions closely.
Performance and build quality
The pump’s job is simple: pull water out of the tub and push it through the drain hose. This unit does that reliably. The motor is sealed, which keeps lint and moisture out of the windings — a common failure point on OEM pumps that have been running for years. Buyers report the pump cycles through a full drain in roughly the same time as the original, typically 2–3 minutes for a standard load.
One thing worth noting: if the pump arrives and the impeller feels stiff when you spin it by hand, that’s normal. The seal tightens during shipping. Run a quick empty drain cycle and it loosens up within the first use.
What buyers consistently praise
The most repeated compliment in the reviews is fit accuracy. One verified buyer wrote, “Dropped right in place of the original on my LG WM3670HWA. Same bolt pattern, same hose connection. Took 20 minutes.” Another noted the noise improvement: “My old pump sounded like a coffee grinder. This one is noticeably quieter.”
Multiple reviews also highlight that buying the full assembly saves you from ordering the motor and pump housing separately — which often costs more and requires two shipping waits.
Where it falls short
Two honest downsides. First, no mounting bracket is included. You’ll need to reuse the one from your old pump. After years of heat and vibration, that plastic bracket can be brittle — inspect it before you start the job. Second, a small number of buyers report the pump is slightly louder than OEM during the first few cycles. It settles down, but if you’re sensitive to appliance noise, factor that in.
Who should buy this
- DIY homeowners with basic mechanical skills. If you can remove a few screws and disconnect a hose clamp, you can install this in under 30 minutes.
- LG/Kenmore owners with models using the 4681EA2001T part number — check your model against the compatibility list before ordering.
- Anyone avoiding a $200–$300 service call. At roughly a third of the repair cost, this part pays for itself on the first install.
Skip it if you’re not comfortable working around a live water supply, or if your washer is still under warranty — that’s a manufacturer repair situation.
FAQ
Q: Will this fit my LG WM3670HWA? Yes. That model is explicitly listed as compatible, and several verified reviews confirm a direct drop-in fit with no modifications.
Q: Do I need to replace the drain hose too? No. The connector on this pump fits the standard factory hose. Only replace the hose if it’s cracked or kinked.
Q: How do I know if the pump is actually the problem? If your washer fills but won’t drain, and the drain hose isn’t clogged, the pump is the prime suspect. Listen for a humming sound during the drain cycle — that’s the motor trying to spin but failing.
The Verdict
Buy it if: You’ve confirmed the 4681EA2001T fits your model and you’re comfortable with a basic DIY repair. This is a solid, well-reviewed replacement that will get your washer draining again for a fraction of the service-call cost.
Skip it if: Your old pump’s mounting bracket is cracked (you’ll need to source a replacement separately), or if you’d rather pay a professional to handle the install.
Rating: 4.6/5 — A reliable, correctly-fitting replacement part with minor caveats around the missing bracket and initial stiffness. For the price, it’s hard to beat.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.