Cat6 CMR Riser (CAT6e) Ethernet Cable 1000ft, 24AWG, Solid B
✅ PROS
- True 24AWG solid bare copper — passes verification tests, not CCA (copper-clad aluminum) masquerading as copper
- CMR riser rating means you can legally pull this through walls and vertical shafts in most residential and commercial settings
- Consistent 550MHz bandwidth rating and clean terminations with standard RJ45 connectors — no surprises at the punchdown block
❌ CONS
- The spool has a bit of coil memory — you'll need to let it relax or pull with tension to get straight runs
- No pull box or dispenser included; a 1000ft spool is heavy and awkward to handle solo without a spool roller
- Jacket is slightly stiff in cold environments, making termination more tedious when pulling in winter conditions
The Verdict
If you’re running ethernet through walls, ceilings, or between floors, you don’t have the luxury of grabbing whatever patch cable is on sale. You need riser-rated, solid conductor cable that passes inspection and delivers gigabit speeds for decades. This Cat6 CMR spool from the B08TSW listing is exactly that kind of product — and it earns its 4.7-star average across 235 ratings.
What’s Actually on the Spool
You’re getting 1000 feet of 24AWG solid bare copper wire, not the copper-clad aluminum (CCA) junk that floods Amazon at lower price points. That distinction matters. CCA conducts poorly, runs hot with PoE, and fails terminations. This cable is the real deal — and several buyers confirmed it with magnet tests and resistance checks.
The cable carries a CMR (Communications Riser) rating, meaning it’s approved for vertical runs in residential and commercial buildings. If you’re pulling through walls, this is the fire safety rating you need — CMP plenum is for air handling spaces, but CMR covers most home and office runs without the extra cost.
The listing markets it as “CAT6e” — technically that’s not an official TIA/EIA category, but the cable tests to Cat6 specs at 550MHz. It’s effectively premium Cat6. Don’t overthink the label.
Real-World Performance
Punching down this cable onto keystone jacks is straightforward. The 24AWG solid conductors are thick enough to seat firmly in IDC terminals without splitting, but not so stiff that they’re painful to work with. One reviewer noted: “Terminated all 48 drops without a single bad end — that’s rare for bulk cable.” That’s the experience I’d expect from quality solid copper.
For gigabit runs, you’ll get full 1000BASE-T performance at the 100-meter limit. If you’re setting up 10GBASE-T, keep runs under 55 meters — that’s standard for Cat6, not a flaw. PoE is a non-issue here; solid bare copper handles the heat dissipation that PoE+ (802.3at) and even PoE++ (802.3bt) demands without the voltage drop you’d see in CCA.
What Buyers Consistently Praise
Across the 235 ratings, three themes dominate:
- Legitimacy of the copper — “Verified with a magnet — not attracted. This is real copper, not that aluminum garbage.”
- The jacket quality — Thick enough to resist nicks from pull strings and staples, but still flexible enough to route through tight corners.
- No kinks on the spool — The cable comes off cleanly without tangled loops that waste time and material.
Where It Falls Short
No product is perfect, and this spool has two honest drawbacks.
First, coil memory is real. After sitting on the spool, the cable wants to hold its coil shape. Pulling long horizontal runs requires tension and some patience — it’s not a dealbreaker, but it’s worth knowing before you start.
Second, there’s no dispenser box. A 1000ft spool of solid copper cable weighs around 25 pounds. If you’re working alone, you’ll want a spool roller or a helper to keep it feeding smoothly. This is standard for bulk cable at this price, but it’s a logistics consideration.
Who Should Buy This
Buy it if: You’re a homeowner running drops to a home office, a small business owner wiring a new office space, or an IT professional doing structured cabling who needs riser-rated cable that passes inspection. This is also the right choice if you’re running PoE cameras or access points — the solid copper handles the current draw reliably.
Skip it if: You only need 50-foot patch cables or you’re running cable in plenum air spaces (you’ll need CMP-rated cable there). Also skip if you’re on a tight budget and only need 250 feet — you’ll pay more upfront, but you won’t waste money on a partial spool.
FAQ
Is this actually CMR riser rated, or just marked as such? Yes — the jacket is printed with the CMR rating and the NEC code designation. Several buyers confirmed it passed inspection in residential and commercial builds. It’s not plenum rated, so don’t use it in HVAC air returns.
Can I use this for outdoor runs? No. This is indoor riser cable. The jacket isn’t UV-rated or water-resistant. For outdoor runs, you need direct burial or outdoor-rated cable. Don’t save money here — water ingress will destroy the copper.
Does it support 10GBASE-T? Yes, up to 55 meters (180 feet). Beyond that, you’re limited to gigabit speeds. For most home and small office runs, that’s more than enough headroom.
The Verdict
Rating: 4.6/5
This is a solid, honest Cat6 cable at a fair price. The bare copper construction, CMR rating, and consistent termination quality make it a dependable choice for anyone doing serious structured cabling. The coil memory and lack of a dispenser are minor annoyances, not dealbreakers.
Buy it if you need riser-rated cable for in-wall runs, you’re powering devices with PoE, or you’ve been burned by CCA cable before. Skip it if you’re just patching short runs or need plenum-rated cable. For everyone else — this spool will serve you well for years, and you’ll forget you ever had a choice to make.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.