BKBKC Compatible 62XL Ink Cartridge Replacement for HP Envy
✅ PROS
- Delivers roughly 80% of OEM print quality at about half the cost per page
- Chipset pairs reliably with HP Envy 5540/5549/5640 series without firmware conflicts
- Includes both black and tri-color cartridges in a single pack — no separate purchases needed
❌ CONS
- Page yield runs 10-15% below genuine HP 62XL claims in real-world mixed printing
- Color accuracy leans slightly warm — noticeable on photo paper but fine for documents
- No expiration date printed on packaging; long-term storage could degrade ink quality
The Verdict
The $40 Question: Can You Trust Third-Party Ink?
HP’s genuine 62XL cartridges will set you back roughly $50 for a two-pack. The BKBKC compatible version sells for about half that. That’s the entire pitch in one sentence. But as anyone who’s been burned by a cheap knockoff cartridge knows, the savings only matter if the ink actually works.
I tested this two-pack (black plus tri-color) across an HP Envy 5540 over three weeks of mixed printing — documents, web pages, photos, and a 40-page report. Here’s what you need to know before clicking buy.
What You Actually Get
The package includes one black XL cartridge and one tri-color XL cartridge. Both come sealed in foil pouches with a plastic protective cap on the print head. Installation is identical to OEM — pop out the old cartridge, peel the tape, snap in the new one. The chipset registered immediately on my Envy 5540 with no “non-genuine cartridge” warning, which is the first hurdle most compatibles stumble on.
The cartridges are physically identical in size and weight to HP’s originals. The tri-color unit houses separate cyan, magenta, and yellow reservoirs — important because it means you can theoretically get more life out of the colors you use less.
Real-World Performance
Print quality is genuinely good for everyday use. Black text comes out crisp with no smudging or feathering on standard copy paper. At 600 DPI, documents look indistinguishable from OEM output. Colors are vibrant in graphics and charts, though I noticed a slight warmth — skin tones printed a touch more red than my calibrated monitor showed. On glossy photo paper, the difference is noticeable but acceptable for casual prints.
Where this cartridge loses ground to HP is page yield. BKBKC claims 600 pages for black and 300 for color — identical to OEM specs. In my testing, the black cartridge hit around 520 pages of mixed text and graphics before the low-ink warning appeared. That’s roughly 13% below claim. Color was closer to spec at about 280 pages. Still, at the price point, the cost per page lands around 4 cents for black versus 6-7 cents for genuine HP.
What Buyers Are Saying
The 204 Amazon ratings average 4.1 stars, and the praise is consistent. One verified buyer notes, “I’ve used these in my Envy 5540 for six months now with zero issues. Print quality is 95% of HP’s own cartridges.” Another mentions, “The chip worked right away — no firmware problems like I had with another brand.”
The complaints cluster around two issues: occasional leaky cartridges (roughly 5-8% of reviews mention this) and the color accuracy issue I found. One reviewer wrote, “The black cartridge died after 400 pages — less than advertised. But for the price, I’m not mad.”
Where It Falls Short
The leak reports are worth taking seriously. If you’re unlucky enough to get a defective unit, BKBKC’s return process requires contacting them directly rather than going through Amazon’s automated system. It works, but it’s slower.
The lack of an expiration date on the packaging is a minor concern. Ink degrades over time, and if these have been sitting in a warehouse for 18 months, you might see clogging or faded output. Buy from a seller with high turnover to minimize this risk.
Also, don’t expect these to work perfectly with every HP printer. They’re specifically designed for the Envy 5540/5549/5640 series. If you have a newer Envy model, verify compatibility before ordering — the chipset firmware has changed on 2024+ models.
Who Should Buy This
- Home users who print less than 300 pages a month and want to cut ink costs without sacrificing quality
- Students on a budget who need reliable black-and-white document printing
- Small office users printing internal documents where color accuracy isn’t critical
Skip it if you print professional photography, need exact Pantone-matching colors, or can’t tolerate any risk of a defective cartridge.
Frequently Asked Questions
Will this void my HP printer warranty? No. In the US, the Magnuson-Moss Warranty Act prevents manufacturers from voiding warranties solely for using third-party consumables. HP can only deny coverage if the cartridge causes actual damage, which is rare.
How do I know if my Envy model is compatible? Check the printer’s model number on the label inside the cartridge access door. This works with Envy 5540, 5541, 5542, 5543, 5544, 5545, 5546, 5547, 5548, 5549, 5640, 5641, 5642, 5643, and 5644.
How many pages will I actually get? Expect 480-550 pages from the black cartridge and 260-300 from color in typical mixed printing. Heavy photo printing will reduce yield significantly.
The Verdict
Buy it if you want 80% of OEM quality at 50-60% of the cost. This is a solid value proposition for everyday home and office printing.
Skip it if you’re printing professional photos, need exact color reproduction, or want zero risk of a defective unit — those 5% of leak complaints are real, and HP’s warranty process is smoother.
Rating: 4.2/5 — The price-to-performance ratio makes this a smart buy for most users. Just don’t expect it to be a perfect clone of the genuine article.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.