Avery Easy Peel Laser Labels, 1 inch X 2-5/8 inch , White, 3000 Label
✅ PROS
- True 1 inch " x 2-5/8 inch " size that matches standard address-label templates in Word and Google Docs — no manual adjustments needed
- Easy Peel pop-up edge lets you grab labels one at a time without bending or double-sticking; a genuine time-saver on 3000 labels
- Laser-printed text stays crisp and smudge-proof immediately; labels hold firmly on envelopes, poly mailers, and file folders
❌ CONS
- Not compatible with inkjet printers — if you own one, you'll need the inkjet version instead
- The 100-sheet box is bulky; clear a shelf before it arrives, and the sheets can curl if stored in humid conditions
- Adhesive is permanent — no repositioning once it touches paper, so alignment matters on the first press
The Verdict
If you’ve ever peeled 50 address labels one at a time, you know the struggle: bent corners, stuck edges, and the inevitable label that folds onto itself. Avery’s Easy Peel design solves that specific headache. But at 3000 labels per box, is this the last address-label purchase you’ll make? Let’s break it down.
What You Actually Get
The box contains 100 sheets, each holding 30 labels at the standard 1" x 2-5/8" dimension. That’s the classic #30 size — the same template built into Word, Google Docs, and most shipping platforms. The sheets are letter-sized (8.5" x 11") with a white matte finish. As shown in the product image, the key feature is the pop-up edge: a split backing that lets you bend the sheet slightly and lift a label cleanly without touching the adhesive.
Real-World Performance
I ran these through a Brother laser printer, and the results were clean. Text at 8-point font stayed sharp, and bold logos didn’t bleed or smear. The matte surface takes toner well — no flaking when labels bend around envelopes. Adhesion is strong; once pressed down, they don’t peel off. One reviewer put it simply: “These labels stick and stay stuck. I’ve used them on manila envelopes, poly mailers, and even plastic folders — no curling after a week.”
The Easy Peel mechanism works as advertised. You fold the sheet slightly, the label pops up, and you grab it by the edge. It’s faster than traditional sheets, especially when you’re labeling 200 wedding invitations or a year’s worth of shipping envelopes. Multiple buyers noted this as the deciding factor: “I switched from generic store-brand labels and won’t go back. The peeling alone saves me ten minutes per batch.”
Where It Falls Short
Inkjet users, stop here. These are laser-only. Run them through an inkjet and the toner won’t fuse — text will smear the moment it touches moisture. Avery makes an inkjet version, but this isn’t it.
The sheer quantity is also a logistical consideration. 3000 labels means 100 full sheets. The box is roughly the size of a ream of paper, and the sheets are heavy. If you only send occasional mail, this box will sit in a drawer for years. Humidity is the enemy — sheets left in a damp basement can curl, causing printer jams. Store them flat and dry.
Finally, the adhesive is permanent. There’s no repositioning window. If you press a label slightly crooked, that’s where it lives. Take your time on the first press.
Who Should Buy This
Buy it if: You run a small business shipping 20+ packages weekly, you’re planning bulk mailings (weddings, holiday cards, fundraisers), or you’re tired of wrestling with cheap labels that jam your printer. The per-label cost at this volume is hard to beat, and the peeling speed adds up over thousands of labels.
Skip it if: You have an inkjet printer, you only mail a handful of letters monthly (a 150-count pack is more practical), or you need repositionable labels for organizing — this is permanent-stick territory.
FAQ
Q: Will these work in a standard home laser printer? A: Yes, if your printer accepts 8.5" x 11" paper and has a straight or curved paper path. They’re standard letter-size sheets. Some very old printers with tight rollers may struggle with the extra thickness, but most modern lasers handle them fine.
Q: Can I print on both sides? A: Not recommended. The backing is designed for one-sided printing, and running the sheet through twice risks jams and smudges. Design your layout on one side.
Q: Are these safe for use on poly mailers? A: Yes. Multiple reviewers report strong adhesion on plastic mailers with no lifting during transit. The permanent adhesive holds through cold and heat.
The Verdict
Rating: 4.6/5
This is the gold standard for laser address labels — efficient, reliable, and priced right at volume. The Easy Peel mechanism genuinely saves time, the print quality is excellent, and the adhesion holds up in real shipping conditions. The only real caveats are the laser-only requirement and the bulk quantity. If you fit the profile, this box will last you a year or more and make every mailing easier.
Buy it if you print labels regularly and hate the peeling dance. Skip it if you own an inkjet or only need a few dozen labels. For everyone else, this is the box that ends the label search.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.