ERP IG9998 Universal Gas Range Oven Igniter
✅ PROS
- Universal fit covers most major brands (GE, Whirlpool, Frigidaire, Samsung) with an adjustable mounting bracket
- Genuine OEM-quality ceramic body and resistance wire rated for 3,000+ ignition cycles
- Two-wire quick-connect system with 24-inch leads simplifies DIY replacement — no soldering required
❌ CONS
- Not compatible with flat-surface igniters used in some newer slide-in ranges — check your old part first
- Mounting holes are slightly wider than OEM specs on some Whirlpool models; may need minor bending of the bracket
The Verdict
When your oven won’t light but the gas is flowing, you’ve got two options: pay a technician $150 to swap a $15 part, or spend 20 minutes doing it yourself. The ERP IG9998 is designed for the second option. Here’s what you need to know before you order.
What You Actually Get
The box contains the igniter itself — a ceramic body with a resistance wire loop — plus two 24-inch wire leads ending in quick-connect terminals. There’s also a universal mounting bracket with pre-drilled slots that adjust to match different screw patterns. No hardware is included, so keep the screws from your old igniter.
This is the “universal” part of the ERP lineup, meaning it’s engineered to replace dozens of OEM part numbers across major brands. As shown in the product image, the design mirrors the standard gas oven igniter layout: ceramic base, exposed heating element, and two-prong connector.
Real-World Performance
The IG9998 works on a simple principle: when the oven calls for heat, the igniter draws current, glows orange-hot, and opens the gas valve once it reaches the right resistance. The key spec here is the resistance rating — this igniter hits approximately 60-90 ohms cold, which is the sweet spot for most American-made gas ranges.
I’ve seen these installed on GE, Whirlpool, and Frigidaire units with consistent results. The ceramic body handles the thermal cycling well, and the wire leads are long enough to reach the harness in most freestanding ranges without extension.
One installer put it plainly: “Replaced the OEM igniter on my 10-year-old GE range. Same glow pattern, same cook times. It’s been six months with heavy baking use and zero issues.”
What Buyers Consistently Praise
The 4.3-star average across 215 ratings reflects a pattern. The most common positive feedback centers on three things:
Price-to-value ratio. At roughly half the cost of brand-specific OEM parts, shoppers appreciate the savings. One reviewer noted: “Local appliance store wanted $68 for the Whirlpool branded part. This was $15 and took 10 minutes to install.”
Ease of installation. The universal bracket and standard connectors make this approachable for anyone comfortable with a screwdriver. Multiple reviewers mention following a YouTube tutorial and finishing in under 30 minutes.
Reliability after install. The most encouraging feedback comes from buyers who replaced cheap knockoffs with this unit. “Third igniter in two years from another brand. This one’s been solid for eight months,” reported one long-term reviewer.
Where It Falls Short
Let’s be direct about the limitations. First, this is not for flat-surface igniters — the rectangular ceramic pads used in many slide-in ranges from LG and Samsung. If your old igniter looks like a flat strip rather than a pencil-shaped element, this won’t fit.
Second, the universal bracket occasionally needs persuasion. A few reviewers on Whirlpool models reported the mounting holes sat 1-2mm wider than the OEM bracket, requiring a slight bend with pliers. Not a dealbreaker, but worth knowing before you start.
Third, the quick-connect terminals aren’t compatible with every harness. Some Frigidaire models use spade connectors that are slightly smaller, so you may need to crimp on adapters.
Who Should Buy This
DIY homeowners with a multimeter and basic tool confidence — this is the right fix. If you’ve confirmed your igniter doesn’t glow but your oven has gas flow, this is almost certainly your part.
Landlords or property managers maintaining multiple units — buying two of these is cheaper than one service call.
Skip it if you own a slide-in range with a flat igniter, or if you haven’t verified the diagnosis. A faulty oven thermostat or gas valve can mimic igniter failure, and this part won’t fix those.
FAQ
Q: How do I know if my igniter is actually the problem? A: Turn on the oven and watch the igniter through the bottom vent. If it doesn’t glow orange within 60 seconds, it’s likely dead. If it glows but the gas doesn’t ignite, the problem is elsewhere.
Q: Will this work on my Samsung or LG range? A: Only if your model uses a cylindrical igniter with two wire leads. Many Korean-brand ranges use proprietary connectors, so verify your old part’s shape before ordering.
Q: How long does installation take? A: Plan for 20-30 minutes. Remove the oven floor, disconnect the old igniter, transfer the mounting screws, and reconnect the two wires. No special tools needed beyond a screwdriver and possibly pliers.
The Verdict
Buy it if you have a standard freestanding gas range with a cylindrical igniter that’s stopped glowing. It’s a genuine OEM-quality part at a fraction of the dealer price, and the universal design genuinely covers most American-made appliances.
Skip it if you’re dealing with a flat igniter or haven’t confirmed the diagnosis — you’ll waste time and money on the wrong part.
Rating: 4.2/5 — The ERP IG9998 does exactly what it promises for the vast majority of gas ranges. The minor bracket fitment issues and connector quirks on certain brands keep it from perfection, but for most DIYers, this is the right call.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.