Connecticut Electric CESMPSC55GRHR 50-Amp RV PNL with 20-Amp
✅ PROS
- Fully pre-wired from the factory — no internal wiring needed; just mount, connect your feed, and plug in
- Includes both a 50-amp 125/250V RV receptacle and a separate 20-amp GFCI outlet in one weatherproof enclosure
- Durable die-cast aluminum housing with a lockable hasp for theft and tamper resistance
❌ CONS
- Input feed wiring must be 6-gauge copper for the 50-amp side; some buyers underestimate the cost of proper wire and breaker
- The included GFCI is a standard duplex outlet, not a dedicated RV pedestal style — you'll need a cover plate for it
- No built-in main breaker; you must supply your own 50-amp double-pole breaker at the source panel
The Verdict
If you’re wiring up a dedicated RV hookup at home, you’ve probably stared at a wall of breaker boxes, receptacles, and conduit fittings wondering where to start. The Connecticut Electric CESMPSC55GRHR takes most of that guesswork off your plate by arriving fully assembled and pre-wired. I’ve torn down enough electrical gear to say this plainly: this is one of the smarter buys in the RV power pedestal category.
What you actually get
This isn’t just a receptacle — it’s a complete outdoor power center. The package includes a NEMA 14-50R 50-amp/125-250V RV outlet, a separate 20-amp GFCI duplex receptacle, and a heavy-duty die-cast aluminum enclosure with a lockable hasp. The dimensions are roughly 7.5 inches wide by 10 inches tall, and it’s designed for surface mounting on a post or wall.
The key thing to understand: it’s pre-wired from the factory. The 50-amp and 20-amp circuits are already connected inside the box. Your job is to bring power to it — a 50-amp double-pole breaker at your main panel, 6-gauge copper wire for the 50-amp feed, and a 12-gauge line for the GFCI circuit. That’s it.
Build quality and real-world performance
The aluminum housing is the standout feature here. It’s rugged, weather-resistant, and the hasp lets you padlock the cover to prevent tampering. Buyers consistently mention how substantial it feels. One reviewer put it this way: “This thing is built like a tank. The cover latches tight and the receptacles feel solid when you plug in.”
In actual use, the 50-amp connection delivers full power to RVs with no voltage drop issues reported. The 20-amp GFCI is a nice perk — it gives you a grounded outlet for tools, lights, or a small appliance without running a separate box. The GFCI trips properly in testing, which is non-negotiable for outdoor use.
Where it falls short
Honest talk: this is not a plug-and-play DIY project if you’re not comfortable with electrical work. You’re supplying the breaker, the wire, and the conduit. Also, the 20-amp GFCI is a standard duplex outlet — it sits in a cutout in the metal box, and you’ll want to add a weatherproof cover for it separately if you plan to use it in exposed rain. The box itself is weather-resistant, but the GFCI face isn’t rated for direct water exposure.
Another thing to note: there’s no main disconnect on this panel. If you need to kill power to the RV outlet for service, you’re doing it at the source breaker. That’s normal for this style, but worth knowing before you buy.
Who should buy this
- Homeowners installing an RV hookup — this is the cleanest way to get a code-compliant 50-amp connection without buying separate components.
- Campground owners or property managers — the lockable hasp and durable housing make it suitable for rental sites.
- DIYers with basic electrical skills — if you’ve run 240V circuits before, this is a straightforward install. If not, budget for an electrician.
Skip it if you need a fully self-contained pedestal with its own main breaker, or if you’re only planning to power a 30-amp RV — you’d be overspending on capacity.
FAQ
Q: Can this be used for a 30-amp RV with an adapter? Yes, you can use a 50-to-30-amp adapter, but the 50-amp receptacle will still deliver 50-amp capacity. It’s fine for occasional use, but if you only ever run a 30-amp rig, a dedicated 30-amp pedestal is cheaper.
Q: What wire do I need for the 50-amp feed? You need 6-gauge copper wire (4-wire: two hots, one neutral, one ground) rated for 50 amps. Run it through conduit if exposed outdoors. The 20-amp GFCI circuit uses 12-gauge wire.
Q: Does this come with a breaker? No. You need a 50-amp double-pole breaker at your main panel feeding this unit. The box itself has no internal breaker.
The Verdict
Rating: 4.6/5 — The Connecticut Electric CESMPSC55GRHR earns its strong rating by being exactly what it claims: a pre-wired, durable RV power panel that simplifies an otherwise fiddly job. The aluminum housing, dual outlets, and lockable cover make it a long-term solution, not a throwaway.
Buy it if you want a permanent, weatherproof 50-amp RV hookup without assembling a dozen separate parts.
Skip it if you’re not prepared for the associated electrical work — wire, breaker, and potentially an electrician’s fee — or if you need a self-contained pedestal with a main disconnect.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.