Brita Plus Water Filter, High Density Replacement Filter for Pitchers and Dispensers, Reduces 2x Contaminants*, Lasts 2 Months, 4 Count | WQA and NSF/ANSI Certified, Reduces Chlorine, Copper, Mercury & Cadmium, Lasts 2 Months, Household Essential
✅ PROS
- Very happy with the quality and taste.
- Great Filtration.
❌ CONS
- Minor drawbacks noted by some users
The Verdict
The Brita Plus isn’t your older sibling’s pitcher filter. While standard Brita filters have been the default dorm-room and apartment-kitchen staple for decades, the Plus line steps up the game with a denser carbon block that targets twice the contaminants. At $27.64 for a four-pack, you’re looking at roughly $6.91 per filter — which covers two months of use. That’s about 12 cents a day for water that’s been stripped of chlorine, copper, mercury, and cadmium, all verified by WQA and NSF/ANSI certification.
What’s Actually in the Box
You get four individually wrapped filters. Each one measures about 4 inches tall and 2.5 inches in diameter, with the standard Brita twist-and-lock top that clicks into place in seconds. The packaging is straightforward — no proprietary connectors, no special tools, no alignment tricks. If you’ve changed a Brita filter before, you’ll have this done in under two minutes. The high-density construction is visibly different from the standard white filters; the carbon block feels denser and heavier in the hand.
Performance: Where the “Plus” Earns Its Name
The filtration claim isn’t marketing fluff. Standard Brita filters reduce around 10 contaminants. The Plus line targets 20, with the headline additions being copper, mercury, and cadmium — heavy metals that can leach from aging plumbing. That’s meaningful if you live in an older building or rely on municipal water that’s passed through miles of pipes.
Taste-wise, the difference is noticeable within the first glass. Chlorine off-flavors disappear immediately, and there’s a clean, neutral profile that makes tap water taste bottled. Users on Amazon consistently confirm this. One verified buyer noted, “I was skeptical about the ‘plus’ marketing, but the water genuinely tastes crisper than with the old filters. My wife noticed before I even told her I’d switched.”
The flow rate is adequate but not quick. You’ll wait about 30 seconds for a full glass through a standard pitcher. That’s the tradeoff for denser media — and it gets slower as the filter approaches its two-month lifespan. Budget for that.
What Buyers Consistently Praise
Across 4,231 ratings at 4.8 stars, the pattern is clear: people value the ease of use and the tangible water quality improvement. One long-term Brita user wrote, “I’ve used Brita for years and skipped the generic brands because the fit is always janky. These drop in perfectly and I don’t have to think about it.” Another highlighted the value math: “Four filters, eight months of clean water. Cheaper than buying bottled water by a mile.”
The two-month lifespan is also a practical sweet spot. Three months risks bacterial buildup in the media; one month is wasteful. Brita’s recommendation aligns with what water filtration experts would suggest anyway.
Where It Falls Short
Let’s be direct: this is a taste-and-odor filter, not a water purifier. It’s NSF/ANSI 42 and 53 certified for the contaminants listed — chlorine, copper, mercury, cadmium — but it does not remove lead, cysts, or PFAS. If your water has known lead issues, you need a certified lead-removal filter or a reverse osmosis system. Brita’s marketing doesn’t hide this, but some shoppers assume “2x contaminants” means more than it does.
The slower flow rate is also worth flagging. If you’re filling a large dispenser or a 64-ounce bottle, you’ll wait. It’s not a dealbreaker, but it’s a real difference from standard filters.
Who Should Buy This
This four-pack is ideal for households using Brita pitchers or dispensers who want better contaminant reduction without switching systems. It’s especially suited for:
- Renters with older plumbing who want heavy metal reduction without a permanent installation
- Bottled-water refugees looking to cut both cost and plastic waste without sacrificing taste
- Coffee and tea drinkers who notice off-flavors from tap water in their brews — the chlorine removal alone is worth it
Skip it if you’re on well water with known bacterial issues, or if you need lead-specific filtration.
FAQ
Q: Do these fit all Brita pitchers? A: Yes, they use the standard Brita filter shape. They drop into every current-model pitcher and dispenser, including the Stream and Grand models. If your pitcher takes a standard white Brita filter, these fit.
Q: How do I know when to replace them? A: Brita recommends every 40 gallons or 2 months. If your water pressure noticeably drops or tastes flat, replace early. The “lasts 2 months” claim assumes average household use of about 5-6 glasses per day.
Q: Are generic filters just as good? A: Some generics are fine, but they’re not always certified to the same standards. These are WQA and NSF/ANSI certified, meaning the contaminant reduction claims are independently verified. With water filtration, certification isn’t a luxury — it’s the only way to know you’re getting what you paid for.
The Verdict
Buy it if: You already own a Brita pitcher, want certified heavy metal reduction, and value the convenience of a drop-in filter that lasts two months.
Skip it if: You need lead or PFAS removal, or you can’t tolerate a slower pour.
Rating: 4.6/5 — The Brita Plus delivers genuine improvements over the standard line at a fair price. It’s not a purifier, and it won’t fix serious water quality problems, but for everyday municipal water improvement, it’s the best value in Brita’s lineup.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.