Amartisan 20-Piece Hex Head Allen Wrench Drill Bit Set, Metr
✅ PROS
- map[Full 20-piece coverage:10 metric (1.5–10mm) and 10 SAE (5/64 inch–3/8 inch) sizes with 1 inch hex shafts that fit standard 1/4 inch quick-change chucks]
- S2 alloy steel construction with black oxide finish resists stripping on stubborn fasteners better than typical CR-V bits
- Magnetic tips hold screws and bolts in place during removal—a genuine time-saver in tight engine bays or recessed hardware
❌ CONS
- No ball-end option; straight tips only, so angled insertion into recessed fasteners isn't possible
- Storage case is functional but basic—no size markings on individual slots, requiring a glance at the bit itself
- Larger sizes (8mm, 10mm, 3/8 inch) lack the torque head design found on dedicated impact driver sets
The Verdict
If you’ve ever dropped a tiny hex screw into an engine bay or fumbled with a loose Allen key while trying to reach a recessed bolt, you already know the pain this set solves. The Amartisan 20-piece hex head Allen wrench drill bit set consolidates every common metric and SAE size into one magnetic, chuck-ready package—and at 4.4 stars from 220 ratings, it’s clearly earning its keep in real workshops.
What’s actually in the box
You get 20 individual bits: 10 metric sizes running from 1.5mm up to 10mm, and 10 SAE sizes from 5/64" to 3/8". Each bit has a standard 1" hex shaft that locks into any 1/4" quick-change chuck—so it works with impact drivers, drill drivers, and even manual hex drivers. The set ships in a molded plastic case that keeps everything organized, though as noted in the cons, the slots aren’t labeled. You’ll identify sizes by reading the laser-etched markings on each bit shaft.
Build quality and real-world performance
The standout feature here is material choice. Amartisan uses S2 alloy steel with a black oxide finish—the same spec used by premium brands like Wera and Bondhus. In practice, that means the smaller bits (1.5mm, 2mm, 5/64") resist twisting and snapping far better than the cheap CR-V steel found in bargain sets. One reviewer put it plainly: “I’ve snapped two cheap sets before this one. These actually hold up on rusted brake caliper bolts.”
The magnetic tips are the second major win. They hold screws and bolts firmly enough to extract them from recessed holes without dropping, but not so strongly that you fight to release them. For anyone working on small appliances, motorcycle hardware, or furniture assembly, this is the difference between a 10-minute job and a 45-minute hunt on the garage floor.
Where it falls short
The most significant limitation: these are straight-tip bits only. There’s no ball-end option, which means you can’t insert them at an angle into flanged or recessed fasteners. If you regularly work on machinery with offset hardware, you’ll still need a ball-end Allen key set for those situations.
The storage case also feels like an afterthought. It’s thin plastic with friction-fit slots—fine for a drawer, but not something you’d want bouncing around a truck bed. And if you’re driving 8mm or 10mm bolts with an impact driver, you’ll notice the lack of a torque-reducing hex design; these bits transmit full force to the fastener, which can occasionally round out softer bolt heads.
Who should buy this
This set hits a sweet spot for three buyer types: DIY furniture assemblers who need every size in one place, home mechanics tackling brake calipers or interior trim, and anyone maintaining bikes, scooters, or power equipment. It’s less ideal for professional tradespeople who need ball-end capability or who work exclusively with impact drivers on heavy fasteners—those users should look at dedicated impact-rated sets.
Frequently asked questions
Will these fit my impact driver? Yes, the 1/4" hex shank fits standard quick-change chucks, and the S2 steel handles occasional impact use. For sustained heavy-duty impact driving, consider a dedicated impact set.
Are the sizes marked clearly? Yes, each bit has laser-etched size markings on the shaft, though they can wear with heavy use. The case slots themselves aren’t labeled.
Do the magnets weaken over time? Based on customer feedback, the magnetic retention holds up well through hundreds of cycles. No reports of significant demagnetization in the reviews we analyzed.
The Verdict
Buy it if you want comprehensive hex bit coverage in one affordable, magnetic set that won’t strip or snap on normal use. Skip it if you specifically need ball-end bits for angled access or you’re a professional requiring impact-rated torque heads.
This is a solid 4.2-star value proposition. It outperforms its price point on material quality, covers nearly every home and hobby scenario, and the magnetic tips genuinely improve workflow. The lack of ball-end options and the basic case are real but minor compromises at this price. For most home workshops, this is the only hex bit set you’ll need.
Rating: 4.2/5 — Recommended for DIYers and home mechanics
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.