Akicon Bathroom Exhaust Fan with Light, 110CFM, 2.0 Sones Ba
✅ PROS
- 110 CFM airflow rating handles bathrooms up to 105 sq ft — enough for a full bath with a shower
- 2.0 sones noise level is genuinely quiet — you won't shout over it during your morning routine
- Integrated 18W LED light is bright (equivalent to a 100W incandescent) with a clean white grille
❌ CONS
- No humidity sensor — you'll need to run it manually or add a timer switch separately
- Grille is plastic, not metal — fine for most but feels less premium than commercial-grade options
- Duct connector size is 4-inch; if your existing rough-in is 6-inch you'll need an adapter
The Verdict
Let’s be blunt: most bathroom fans under $50 are noisy, weak, and look like they belong in a gas station restroom. The Akicon 110CFM exhaust fan with light isn’t that — but it’s not a premium Panasonic either. Here’s where it actually lands after digging through 215 verified ratings and the spec sheet.
What you’re actually getting
The box contains the fan housing with a pre-mounted blower, the white polycarbonate grille, an integrated 18W LED light module, and standard mounting hardware. The unit is designed for 4-inch ducting — check your existing rough-in before ordering. The housing is 13 x 13 inches, which fits standard ceiling joist spacing without modification. One thing worth noting from the product images: the grille is a clean, modern square design that sits flush — no bulky dome sticking down into your bathroom.
Performance and real-world use
At 110 CFM, this fan is rated for bathrooms up to roughly 105 square feet. That’s the sweet spot for a typical full bath with a shower — it’ll cycle the air adequately to keep mirrors from fogging and stop moisture from lingering on walls. The 2.0 sones rating translates to roughly a quiet library hum. It’s audible but not intrusive; you can hold a conversation or watch your phone without cranking the volume.
The LED light is genuinely useful — 18 watts pushing out light equivalent to a 100W incandescent. It’s bright enough to shave by, and the color temperature is a neutral daylight white, not that sickly yellow or harsh blue you get from cheap fixtures.
What buyers consistently praise
The noise level is the headline across verified reviews. One buyer noted, “I was expecting the typical loud rattling fan. This is actually quiet — I forget it’s running.” Another recurring theme is installation ease: “Direct replacement for the old builder-grade fan. Wired up in about 30 minutes with basic tools.” The light brightness also gets consistent mentions, with multiple buyers saying it replaced a separate light fixture entirely.
Where it falls short
No humidity sensor is the biggest miss. At this price point, you can’t expect it, but it’s worth knowing — you’ll either run it manually or wire in a timer switch (a $15 upgrade that’s worth it). The plastic grille is another tradeoff. It’s sturdy enough and won’t yellow like cheaper polycarbonates, but if you’re used to brushed metal fixtures, it’ll feel a step down. A few buyers also mentioned the fan isn’t completely silent on the highest setting — the 2.0 sones is real, but it’s not the near-silent 0.3-0.5 sones you’d get from premium units costing 3x as much.
Who should buy this
- DIY homeowners replacing a builder-grade fan in a standard-size bath — this is a direct, painless swap
- Rental property owners who want something quiet and reliable without overspending
- Anyone with a 4-inch duct already in place and a bathroom under 100 sq ft
Skip it if you need a humidity-sensing auto fan, have a 6-inch duct requiring an adapter, or want commercial-grade build quality for a high-end renovation.
FAQ
Q: Is this fan quiet enough for a nursery-adjacent bathroom? A: At 2.0 sones, it’s quiet enough for normal conversation but not silent. If the fan is directly above a sleeping baby’s room, consider a 0.5 sone model. Otherwise, it’s fine.
Q: Does the LED light need a special dimmer switch? A: No — it’s a standard integrated LED. But it’s not dimmable unless you have a compatible LED dimmer, and the fan and light are typically on separate circuits if wired correctly.
Q: Will this fit in an existing 8-inch round ceiling hole? A: The housing is designed for new construction or retrofit between 16-inch joists. If you have a round hole, you’ll need a retrofit bracket kit — this doesn’t include one.
The Verdict
Buy it if you want a quiet, bright, reliable bathroom fan for a standard-size bath without paying premium prices. It does exactly what it claims, installs easily, and the light is a genuine bonus.
Skip it if you need smart features like humidity sensing, have non-standard ducting, or demand commercial-grade metal construction.
Rating: 4.2/5 — A solid value pick that nails the basics. It won’t blow you away, but it won’t disappoint either.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.