316075103 316075104 Oven Heating Element for Frigidaire Kenm
✅ PROS
- Precise OEM-equivalent fit for Frigidaire and Kenmore 790-series ranges — no bending or modification needed.
- 240V/3200W rating matches original bake element output; even heating across the oven cavity.
- Includes both the element and new mounting hardware, saving a separate parts order.
❌ CONS
- Terminal connections are bare spade-style — you'll need a 1/4-inch nut driver and basic electrical comfort.
- No paper manual included; wiring diagram is only on the box label (take a photo before you toss it).
The Verdict
The 316075103/316075104 is the bake element your Frigidaire or Kenmore 790 has been begging for. If you’re staring at an oven that won’t heat, won’t reach temperature, or heats unevenly, this is the replacement part that solves it. With 240 ratings averaging 4.8 stars, the consensus is clear: this is the bake element to buy.
What’s in the Box
You get the heating element itself (the coiled metal tube that sits on the oven floor), plus the mounting screws and brackets. The part number 316075103 is the newer revision, replacing both 316075102 and PS438018. It’s a direct swap — no adapter plates, no cutting, no creative engineering. As one buyer put it, “Fit perfectly on my Frigidaire Gallery. Same shape, same mounting holes, same plug connection. Took 15 minutes.”
Build Quality and Real-World Performance
This is a 240-volt, 3200-watt element — the same spec as the factory original. The difference between this and a cheap no-name element shows up in the metal gauge. The tube is thick, the terminal block is solid, and the mounting flange doesn’t flex when you tighten it down. In the oven, it glows evenly red across the full loop within about three minutes. That even distribution is what you’re paying for — a weak element heats the center but leaves the edges cold, which ruins baking.
Installation is genuinely straightforward for anyone with basic DIY confidence. You’ll need a 1/4-inch nut driver for the terminal screws and possibly a Phillips head for the mounting bracket. The whole job runs 20 to 30 minutes. The only real gotcha: kill the power at the breaker first. Multiple reviewers emphasized this, and one noted, “I forgot to flip the breaker and got a nice spark. Don’t be me.”
What Buyers Consistently Praise
The 4.8-star rating isn’t an accident. Across reviews, three themes dominate:
- Perfect OEM fit. Owners of Frigidaire, Frigidaire Gallery, and Kenmore 790 ranges all report the same thing — this element bolts in without fighting.
- Fast heat recovery. Several reviewers noted their ovens reached preheat temp in about the same time as when new.
- Longevity. Multiple buyers reported installing this element over a year ago with zero issues since.
Where It Falls Short
No product is flawless, and this one has a couple of honest limitations. First, the terminal connections are bare spade-style lugs. If you’re not comfortable working with exposed electrical connections, this isn’t a “plug-and-play” job — it’s a “screwdriver and confidence” job. Second, there’s no printed manual. The wiring diagram is on the box label, so photograph it before recycling the packaging. It’s not a dealbreaker, but it’s worth knowing.
Who Should Buy This
- The DIY homeowner with a Frigidaire or Kenmore 790 range that’s throwing error codes like “F3” or simply not heating. This is your fix.
- The cost-conscious cook comparing this against a $150+ service call. At a fraction of that, you’ll save real money.
- Anyone tired of cold-center baking. If your cookies are raw in the middle and burned on the edges, the bake element is the prime suspect.
FAQ
Q: Will this fit my Kenmore 790 model?
A: If your model uses the 316075102, 316075103, or 316075104 element, yes. Check your original part number or cross-reference your model on the compatibility list before ordering.
Q: Do I need to replace the broil element too?
A: No. This is the bake element (bottom). Your broil element (top) is a separate part. Replace only what’s broken.
Q: Is professional installation required?
A: No, but if you’re not comfortable with basic electrical work, pay a pro. The risk is live 240V — flip the breaker and verify with a voltage tester.
The Verdict
Buy it if: Your Frigidaire or Kenmore 790 oven is dead or uneven, and you can handle a screwdriver and a breaker switch. This is the right part at the right price, backed by hundreds of satisfied buyers.
Skip it if: You want a plug-and-play no-tools solution, or you’re replacing a different element (broil, convection, or igniter).
Rating: 4.6/5 — Docked slightly for the bare-wire terminals and missing printed instructions, but the fit, performance, and price make this the clear choice for a DIY oven repair.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.