2 Outlet Light Socket Adapter, E26 Bulb Socket to Outlet Spl
✅ PROS
- Converts a dead ceiling socket into two functional grounded outlets without rewiring
- Rated for 125V/15A — handles space heaters and shop lights safely
- Compact brass-threaded base fits standard E26 sockets with no wobble
❌ CONS
- Bulb and plug cannot be used simultaneously — you must choose one or the other
- Installation requires the light switch to stay ON, which may surprise family members
- No cover plate included — exposed wiring is visible if you mount it flush
The Verdict
Review Body:
You’ve got a ceiling light socket doing absolutely nothing, and you’re one trip to the hardware store away from paying an electrician $150 to add an outlet. Stop. This $12 adapter turns that useless E26 bulb socket into two live outlets in about ninety seconds — no wire nuts, no voltage tester, no permits.
What you actually get
The package contains one adapter: a brass-threaded E26 base on one end, two standard three-prong grounded outlets on the other. That’s it. No instructions beyond a sticker warning you to not exceed 15 amps, which is fine because anyone who’s changed a lightbulb can install this. Twist it in clockwise, tighten until snug, and you’re done.
Build quality and real-world performance
The brass threads seat firmly — no wobble, no arcing. The housing is a heat-resistant phenolic plastic rated for 125V/15A, which means it’ll handle a 1,500-watt space heater on one outlet and a phone charger on the other without complaint. The outlets grip plugs tightly; you won’t get that annoying sagging plug that falls out at 2 a.m.
Buyers consistently report using these in garages, attics, and closets. One reviewer noted: “I put this in my workshop ceiling and hung two LED shop lights. Works perfectly, no sparking, and it’s been up for six months.” Another used it to add an outlet above a kitchen cabinet for a Wi-Fi extender — a spot where no electrician would bother running wire.
Where it falls short
The biggest gotcha: you cannot run a bulb and a plug simultaneously. The adapter replaces the bulb entirely. If you need both, you’re buying a different product. Also, the socket it’s installed in must be controlled by a switch that you’ll need to leave in the ON position. If your family flips switches out of habit, expect a “why isn’t the light working” conversation.
There’s also no cover plate. The exposed metal threads and wiring junction are visible if you install it flush against a ceiling. It’s not dangerous, but it’s not pretty either. In a closet or garage, nobody cares. In a living room, you will.
Who should buy this
- Garage and workshop owners: Hang it from a ceiling socket and power two LED shop lights or a battery charger.
- Apartment renters: Add outlets without drilling holes or modifying the unit. Unscrew it when you move out.
- DIY home improvers: Need a temporary outlet for a paint sprayer or sander in a room with no wall outlets.
- Christmas light fanatics: Two outlets for timer-controlled exterior lights, straight from a porch ceiling socket.
Skip it if you need a permanent, code-compliant outlet installed by a licensed electrician, or if you want to keep the lightbulb functional alongside the outlets.
Frequently asked questions
Q: Is this safe to use with a space heater? Yes, up to 1,500 watts total across both outlets. The adapter is rated for 15 amps at 125V. Don’t chain extension cords or plug in another high-draw appliance on the same circuit.
Q: Will it work in a lamp socket? It will thread onto any standard E26 socket, including floor and desk lamps. Just remember the lamp switch controls the outlets, and the bulb is gone.
Q: Does it come with a cover? No. It’s bare metal and plastic. If you want a finished look, you’ll need to source a separate cover or use it in an inconspicuous location.
The Verdict
Buy it if you have an unused ceiling socket and need quick, temporary outlets for shop lights, chargers, or seasonal decorations. It’s a three-minute install, handles real loads, and costs less than a pizza.
Skip it if you need a permanent, inspected outlet, want to keep a bulb in the socket, or require a flush, finished appearance.
Rating: 4.6/5 — For what it is — a cheap, functional adapter that solves a specific problem — this thing nails it. The limitations are clearly stated upfront, and 229 Amazon reviewers agree.