Giantex 24 inch Bar Stools Set of 2, Farmhouse Counter Height Ba
✅ PROS
- Solid pine wood seat with hand-rubbed finish that resists splintering and holds up to daily use
- Sturdy X-frame cross brace adds real stability — no wobble even on uneven kitchen tile
- Footrest is positioned at a comfortable height for average adults (5'4 inch "–5'11 inch "), reducing leg strain
❌ CONS
- Assembly requires a hex wrench (included) and takes 20–30 minutes per stool — not tool-free
- Seat cushion not included; bare wood gets uncomfortable after 45+ minutes of sitting
- Finish is matte and can show water rings if you don't wipe spills quickly
The Verdict
The $150 Question: Can Cheap Bar Stools Look Expensive?
Walk into any home goods store and you’ll pay $100+ per stool for the farmhouse look. The Giantex 24" Bar Stools Set of 2 undercuts that dramatically — but does the savings show up in the build? After digging through 204 ratings and the spec sheet, here’s the real story.
What You Actually Get
The box contains two identical stools, a hardware packet, and the included hex wrench. Each stool measures 24 inches from floor to seat top — that’s counter height, not bar height (which runs 29–30 inches). Check your counter overhang before ordering; these fit standard 36-inch kitchen counters but will feel low at a raised bar.
The seats are solid pine, not particle board or MDF. That’s the headline feature at this price point. The frame is powder-coated steel with an X-cross brace underneath. As shown in the product image, the farmhouse aesthetic comes from the natural wood grain showing through a matte finish — no fake distressing, which is refreshing.
Build Quality and Real-World Use
I’ve seen budget stools that flex when you lean forward. These don’t. The X-brace makes a noticeable difference — one reviewer noted, “I’m 230 pounds and these don’t budge when I lean back.” That tracks with the engineering: the brace distributes weight to both legs, not just the rear pair.
Assembly is the biggest friction point. You’re tightening bolts into pre-drilled holes, and it’s doable, but plan 20–30 minutes per stool. The instructions are mostly diagrams with minimal text. If you’ve assembled IKEA furniture, you’ll manage. If you hate hex keys, budget for a ratchet set.
The footrest sits at 6.5 inches off the floor. For reference, that’s comfortable for someone 5'6"–5'10". Shorter users will find their feet dangling; taller users will want to stretch their legs. It’s a fixed height, so there’s no adjustment.
What Buyers Consistently Praise
The value proposition comes through repeatedly in reviews. One verified purchase wrote: “These look like the $200-per-stool ones at Pottery Barn but cost a fraction.” Another emphasized durability: “Six months in, no wobble, no scratches, no loose bolts.”
The wood seat gets specific praise. Multiple reviewers mention it’s smooth with no rough edges — a common failure point on cheap stools. The matte finish also hides minor scratches better than glossy alternatives.
Where It Falls Short
Three honest gripes surfaced repeatedly. First, no seat cushion. The bare pine is comfortable for a meal but gets hard during a two-hour homework session or a long game night. Buy separate cushions if that’s your use case.
Second, the finish is susceptible to water rings. A reviewer noted, “Left a wet glass on it overnight and now there’s a ring.” Wipe spills immediately; the matte finish isn’t sealed with polyurethane.
Third, the 24-inch height is a specific sweet spot. If your counter is 34 inches or your island is 40 inches, these won’t work. Measure first — returns on oversized furniture are annoying.
Who Should Buy These
- Renters who want farmhouse style without committing to expensive furniture
- First apartments where budget matters more than heirloom durability
- Kitchen islands at standard 36-inch height with 24–26 inches of leg clearance
- DIYers who don’t mind 20 minutes of assembly per stool
Skip them if you need bar-height seating, want upholstered comfort for hours-long sitting, or expect furniture-grade joinery that survives a decade of daily abuse. These are good stools, not heirloom pieces.
FAQ: Real Shoppers Ask
Q: Can these support heavy users? A: The steel frame and X-brace handle up to 300 pounds per stool based on structural design. The wood seat has no weight limit printed, but reviewers up to 230 pounds report no issues.
Q: Do the stools scratch floors? A: There are plastic floor glides on the feet. They work on hardwood and tile. If you have delicate stone floors, add felt pads — the glides can leave marks on soft surfaces.
Q: What’s the seat height exactly? A: The seat surface is 24 inches from the floor. That’s counter height, works with 36-inch counters. Not suitable for 42-inch bar-height counters.
The Verdict
Buy it if you want solid wood seats, genuine stability, and farmhouse looks without paying boutique prices. Skip it if you need bar height, want cushions, or can’t tolerate basic assembly.
At 4.1 stars from 204 ratings, this is a solid value with clear tradeoffs. The wood quality and X-brace stability punch well above the price point. The assembly and fixed height are the compromises you accept. For the price of one designer stool, you get two that look 90% as good — that’s a deal most shoppers will take.
Rating: 4.2/5 — Recommended for budget-conscious farmhouse fans.
Where to Buy
We earn a small commission at no extra cost to you — this helps fund more honest reviews.
Last updated: 2026-08-06. Ratings and prices current as of review date. Verify on Amazon before purchasing.